Gold bangles are the most expensive ones
Bangles are also an important part of jewellery as earrings and chains. All types of bangles are worn by women in pairs, with one or bunch of bangles in both hands. There are many types of bangles in India such as gold, metal, glass, silver, plastic, platinum and wood.
Gold bangles are the most expensive ones so first bangles were made from metal. To look more attractive Indian women started wearing gold and glass bangles in combination, instead of wearing only gold bangles. These bangles are smooth with some texture or set with stones. They are worn in groups, so any arm movement that you make will create pleasant sounds. In traditional functions like marriage glass bangles are mostly preferred.
Cleaning is must in gemstone
For stubborn dirt, a soft brush can also be used on these types of stones. In hot environments, the heat can cause the water to evaporate and discolor an opal. Jewellers use mechanical cleaning procedures to clean gemstones. Some of these methods can be harmful if done incorrectly, so ensure that the cleaning is being performed by a qualified professional.
One common method is ultrasonic cleaning, which uses frequency waves to clean gemstones. They can be cleaned in the same mild detergent and water solution as other gemstones, and delicately scrubbed with a very soft brush. Designer jewellery can cover the gamut of rings, engagement and wedding rings, watches, necklaces and pendants, bracelets and anklets, cuff links, tiaras and other unusual pieces.
Taking care of gemstones
Steam cleaning is quite effective but can result in thermal shock because of the often-quick temperature change. It can result in cracking because parts of the stone are forced to expand at different times. Most gemstones can be immersed in a solution of mild detergent and warm water.
Likewise with pearls; although soaking can result in discoloration, so this should always be avoided. After soaking for a few minutes, gently clean the stone with a soft brush. Pearls should be dried after cleaning, using a soft towel, and air-blown dry. Extra care should be taken to remove dirt from the bottom of the setting, a common place for build-up to occur.